Group Admins
Open Discussion Group
Public Group active 37 minutes agoThis group is open to all registered members of the site.
-
Martin Colucci started the forum topic Inline Cable Separator in the group
Open Discussion Group 37 minutes agoWhere can one purchase the stainless inline cable separators.
-
David Balkwill replied to the forum topic Hello from a new member in the group
Open Discussion Group 11 hours, 41 minutes agoNext question, are these rims any good ?
-
David Balkwill replied to the forum topic Hello from a new member in the group
Open Discussion Group 11 hours, 46 minutes agoWow, brave man ! Do you already have a waiting list of people wanting these ?
The Capreo hub information I have found says
“It comes set up for 135 mm spacing, but the left side of the axle has two removable […] -
kenneth buttterfield replied to the forum topic Hello from a new member in the group
Open Discussion Group 21 hours, 28 minutes agoI think that it was me asking about tubs, but since then I have commisioned a batch from a world known maker and should be arriving soon, so my first go on tubs then!
As for axle ..not sure …is it the right length?..ken -
David Balkwill replied to the forum topic Hiring a TSR 27 / 30 in the group
Open Discussion Group 1 day, 1 hour agoAngus, There’s a TSR30 for sale in Grenoble at the moment for 1500€ Looks in perfect condition having been ridden just 150Km. I can give you his contact details if you’re interested. David
-
David Balkwill replied to the forum topic Hello from a new member in the group
Open Discussion Group 1 day, 1 hour agoThanks Ken, 17″ it will be I think. The Capreo option with the small sprockets means the chainwheel doesn’t have to be as big, so availability becomes easier there. In fact for this shortish commute, I could […]
-
Clifford Slocombe posted an update in the group
Open Discussion Group 1 day, 2 hours agoJust completed UK C2C route on my TSR-27.
Not the greatest weather over the Pennines and the wind was blowing hard in the wrong direction (unusually). No problems other than a single puncture. Used Continental Contact Reflex tyres rather than the original Scwalbe Marathons for better mudguard clearance, and a Carradice SQR Tour seat-post mounted…[Read more]
-
Clifford Slocombe posted an update in the group
Open Discussion Group 1 day, 2 hours agoAnyone who uses LinkedIn might be interested to know that it has a Moulton Bicycle Riders group. Its a bit quiet and rather small at the moment, so if you already use LinkedIn you might want to join the group.
-
kenneth buttterfield replied to the forum topic Hello from a new member in the group
Open Discussion Group 1 day, 4 hours agoWell done david, A great choice for a sporting moulton, I have done many miles on the mk3 and find the short wheelbase and ease of mods very good….sorry no knowledge of capreo…might not be cheap […]
-
David Balkwill replied to the forum topic Hello from a new member in the group
Open Discussion Group 1 day, 6 hours agoI just bought a Mk3 on eBay. Have to come over to the UK to pick up some things fairly soon, so I should be riding before it gets too hot!
Now I need to find some good wheels, and sort out cranks, chainwheel, […] -
David Balkwill replied to the forum topic Any members in France? in the group
Open Discussion Group 2 days, 5 hours agoGraham,
You seem to have quite a collection. Any spare ones you would be prepared to sell?
The weather is getting warmer and I’d like to start riding again.
David -
George G. Garnett replied to the forum topic Any members in France? in the group
Open Discussion Group 2 days, 6 hours agoBonsoir David,
I recently enquired to buy a new TSR27 in France. Was offered a higher price than in UK PLUS transportation costs to France! I bought a used APB Land Rover in the UK and did a daytrip to collect […] -
Angus Fletcher started the forum topic Hiring a TSR 27 / 30 in the group
Open Discussion Group 2 days, 6 hours agoHi
I’m planning to take part in the Dunwich Dynamo at the end of June. I have a TSR 2 that I think will be just too much like hard work. I’m planning to buy a TSR 30 later in the year but will not have saved […] -
Matthew Dunn replied to the forum topic Ian’s speedsix in the group
Open Discussion Group 4 days, 14 hours agoSorry Ken,
Been away for a while so not been getting my daily dose of Moulton type stuff. Thanks for the info, makes sense so I’m sure you’re right. Wasn’t the design of the P2 (or the Campag mech it was […] -
David Balkwill replied to the forum topic Any members in France? in the group
Open Discussion Group 5 days, 10 hours agoHello Graham,
I’m in Nantes, and looking to buy a Moulton. I see there is one for sale on leboncoin, but it’s in Avignon and that’s further than the UK!
Let me know if you hear of any others, even just a […] -
George G. Garnett replied to the forum topic Any members in France? in the group
Open Discussion Group 6 days, 11 hours agoThere certainly is a member permanently resident in France. Based in Calvados.
C’est moi…
Cordialement,
Graham -
Bob MacQueen started the forum topic Personal contact now!! in the group
Open Discussion Group 1 week, 2 days agoJust got notification of a new personal message and when i opened it couldn’t believe my luck a promise of love and devotion
These Russian girls certainly seem to be everywhere!!
Can we block the spam please […] -
David Balkwill started the forum topic Any members in France? in the group
Open Discussion Group 1 week, 3 days agoThere seem to be signs of Moultons in France from what I can see looking on the web. Are there any members here, or does anyone have any links?
Merci
David -
kenneth buttterfield replied to the forum topic Ian’s speedsix in the group
Open Discussion Group 1 week, 3 days agoMatt, just a couple of guesses, but I always assumed that the P2 leaned back like this to allow more chain wrap around, with the bonus that it gave more ground clearance?
ken -
Matthew Dunn replied to the forum topic Ian’s speedsix in the group
Open Discussion Group 1 week, 3 days agoFrom a layman’s point of view (as in no experience but been thinking about it), you could cold set the rear forks to fit the Capreo hub (I saw a blog somewhere of someone hot setting them for the same hub but […]
- Load More
Join now using Paypal
