Open Discussion Group

Dual sram drive option a F Frame

Tagged: , , ,

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 14, 2013 at 1:49 pm #3666
    ididnotkilljfk
    Participant

    My yellow mean machine

    March 29, 2013 at 8:52 pm #3667
    Alexander Johnston
    Participant

    Hi there
    I’m no expert but I’ve never heard of anyone putting a Dualdrive 3×9 into a F frame so I suspect it’s not possible or only possible with great difficulty.
    I suspect there isn’t the room for the hub and 9 cog cassette especially with Mark 2 rear forks which are difficult to widen, so I have read.
    Alex

    March 30, 2013 at 10:11 am #3668
    Ian
    Participant

    The Series 2 forks are not that hard to widen Alex – a car jack and some care does the trick. I opened some up to 135mm for an SRAM S7 hub easily enough.

    April 1, 2013 at 11:04 am #3669
    john bartlett
    Member

    I have a mk3 with a Sachs 3×7 set up, it needed some work to the rear triangle
    jb

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.